NC PTCA Balloon Dilatation Catheter
caractéristiques du produit
1. Material has excellent resistance to high pressure, NP-12atm and RBP-22atm, to provide good dilation performance in calcified lesions
2. Low compliance design and low inflation rate from NP to RBP supply accurate concentrations of expansion size and optimizing expansion effect
3. A short taper shoulder reduces the excess expansion at balloon ends, allows for a better focus on the target lesion and minimizes the damages to the vessel
4. A super slippery hydrophilic coating improves the catheter’s ability to push forward and decreases operation time
5. Brilliant performance of folding after balloon expansion allowing for easier withdrawal
Size Matrix of NC PTCA Balloon Dilatation Catheter
| Balloon Diameter(mm) | Balloon Length(mm) | |||||||||
| 6 | 8 | 10 | 12 | 15 | 20 | 25 | 30 | |||
| 2.00 | √ | √ | √ | √ | √ | √ | √ | √ | ||
| 2.25 | √ | √ | √ | √ | √ | √ | √ | √ | ||
| 2.50 | √ | √ | √ | √ | √ | √ | √ | √ | ||
| 2.75 | √ | √ | √ | √ | √ | √ | √ | √ | ||
| 3.00 | √ | √ | √ | √ | √ | √ | √ | √ | ||
| 3.25 | √ | √ | √ | √ | √ | √ | √ | √ | ||
| 3.50 | √ | √ | √ | √ | √ | √ | √ | √ | ||
| 3.75 | √ | √ | √ | √ | √ | √ | √ | √ | ||
| 4.00 | √ | √ | √ | √ | √ | √ | √ | √ | ||
| 4.50 | √ | √ | √ | √ | √ | √ | - | - | ||
| 5.00 | √ | √ | √ | √ | √ | √ | - | - | ||
| Balloon diameter (mm) | Balloon length （mm） | |||||||||
| 6 | 8 | 10 | 12 | 15 | 20 | 25 | 30 | |||
| 2.00 | ● | ● | ● | ● | ● | ● | ● | ● | ||
| 2.25 | ● | ● | ● | ● | ● | ● | ● | ● | ||
| 2.50 | ● | ● | ● | ● | ● | ● | ● | ● | ||
| 2.75 | ● | ● | ● | ● | ● | ● | ● | ● | ||
| 3.00 | ● | ● | ● | ● | ● | ● | ● | ● | ||
| 3.25 | ● | ● | ● | ● | ● | ● | ● | ● | ||
| 3.50 | ● | ● | ● | ● | ● | ● | ● | ● | ||
| 3.75 | ● | ● | ● | ● | ● | ● | ● | ● | ||
| 4.00 | ● | ● | ● | ● | ● | ● | ● | ● | ||
| 4.50 | ● | ● | ● | ● | ● | ● | N / A | N / A | ||
| 5.00 | ● | ● | ● | ● | ● | ● | N / A | N / A | ||